Jøtul F500 V3 Oslo Wood Stove

The Jøtul F500 V3 Oslo Wood Stove combines traditional cast-iron craftsmanship with advanced clean-burning technology to deliver powerful, efficient wood heat. A two-time Vesta Award winner, including Best in Show and Best New Technology, the F500 V3 Oslo is designed for homeowners looking for a high-performance wood stove with modern combustion technology.

At the heart of the Jøtul F500 V3 Oslo Wood Stove is patented Jøtul Fusion™ Technology, which combines the advantages of a non-catalytic wood stove with Jøtul High Flow™ Combustor technology. Unlike many catalytic wood stoves, the F500 V3 Oslo is designed to operate without a combustor bypass, allowing the stove to remain in clean-burn mode throughout its operation.

With heat input of up to 70,000 BTU/hr, a heating capacity of up to 2,300 square feet, and the ability to accommodate logs up to 24 inches long, the Jøtul F500 V3 Oslo is built to provide substantial heat for larger homes, cabins, and other residential spaces.

Jøtul Fusion™ Technology

The defining feature of the Jøtul F500 V3 Oslo Wood Stove is its patented Jøtul Fusion™ Technology.

This technology combines the characteristics of a traditional non-catalytic wood stove with Jøtul’s High Flow™ Combustor technology. The result is a combustion system designed to provide clean and efficient wood burning without requiring a conventional combustor bypass.

Because there is no combustor bypass, the F500 V3 Oslo is designed to operate in clean-burn mode 100% of the time, helping simplify operation while maintaining efficient combustion.

Powerful Heating for Up to 2,300 Square Feet

The Jøtul F500 V3 Oslo provides up to 70,000 BTU/hr of heat input and is rated to heat spaces of up to approximately 2,300 sq. ft.

Its large 2.5 cu. ft. manufacturer-rated firebox provides plenty of space for larger loads of firewood and accepts logs up to 24 inches long. The larger firebox can help reduce the frequency of reloads during extended heating periods.

The stove is rated for a maximum burn time of up to 10 hours, although actual burn times depend on wood species, moisture content, loading, draft, installation, operating conditions, and other factors.

Clean-Burning Wood Stove

The Jøtul F500 V3 Oslo Wood Stove is designed around efficient, clean combustion. It produces reported particulate emissions of approximately 1.0 g/hr and has listed efficiency ratings of 84.7% LHV and 78.4% HHV.

Using properly seasoned firewood and following the manufacturer’s operating instructions is important for achieving efficient combustion and maintaining the stove’s intended performance.

Durable Cast-Iron Construction

Like many Jøtul wood heating appliances, the F500 V3 Oslo features durable cast-iron construction.

The substantial cast-iron body gives the stove a traditional appearance while providing the durability expected from a premium wood-burning appliance. With a listed weight of approximately 445 lbs., the F500 V3 Oslo is a substantial stove designed for long-term residential use.

Flexible Top and Rear Venting

The Jøtul F500 V3 Oslo supports top and rear venting configurations, providing flexibility when planning the stove installation.

It uses a 6-inch flue and can be configured with an optional short-leg kit. The short-leg configuration reduces the stove’s overall height and may be useful for installations where height or clearance requirements need to be considered.

Always follow the manufacturer’s installation instructions and applicable local building, fire, and safety requirements.

Key Features of the Jøtul F500 V3 Oslo

• Jøtul F500 V3 Oslo Wood Stove
• Two-time Vesta Award winner
• Vesta Award winner for Best in Show
• Vesta Award winner for Best New Technology
• Patented Jøtul Fusion™ Technology
• Jøtul High Flow™ Combustor technology
• Designed to operate without a combustor bypass
• Clean-burn operation throughout the burn cycle
• Heating capacity of up to 2,300 sq. ft.
• Heat input of up to 70,000 BTU/hr
• 84.7% LHV / 78.4% HHV efficiency
• Approximately 1.0 g/hr particulate emissions
• Up to 10 hours maximum burn time
• Accepts logs up to 24 inches
• 2.5 cu. ft. manufacturer-rated firebox
• Cast-iron construction
• Front/side loading
• Optional blower
• 6-inch flue
• Top/rear venting configuration
• Optional short-leg kit
• Approximately 445 lbs.

Jøtul F500 V3 Oslo Specifications

Why Choose the Jøtul F500 V3 Oslo Wood Stove?

The Jøtul F500 V3 Oslo Wood Stove is a strong choice for homeowners who want powerful wood heating combined with advanced combustion technology and classic cast-iron construction.

Its combination of Jøtul Fusion™ Technology, the High Flow™ Combustor, no combustor bypass, large 24-inch log capacity, and heating capability of up to 2,300 square feet makes the F500 V3 Oslo particularly attractive for homeowners seeking a high-performance wood stove for larger living spaces.

The large firebox and up to 10-hour maximum burn time can also provide convenient extended heating, while the top/rear venting options provide greater flexibility during installation.

Installation and Performance Disclaimer

All specifications are based on manufacturer information and may change without notice. Heating capacity, heat output, efficiency, and burn time are provided as general guidelines and can vary depending on climate, insulation, home construction, installation, chimney draft, fuel quality, moisture content, and operating practices.

Always consult the manufacturer’s current installation manual and a qualified professional to determine appropriate clearances, hearth requirements, chimney configuration, and installation requirements before installing the stove.